When the internal dividers are complete. Fit into the box.
Step 9
Reply
Tag Archives: html
Step 8
Assembly of internal dividers. Slot the width pieces into length pieces.
Step 7
Clip in handle. This requires lifting the handle through the hole. Repeat for the opposite end.
Step 6
Ensure all box end pieces fit / clip under the handle.
Step 5
Lower the handle into the end of the box.
Step 4
Fit a handle into both holes / handle lugs on the sides of boxes.
Step 3
Bring together both box sides and the box ends together.
Step 2
Work on one end at a time. Bend up side ends.
Step 1
Place on your work surface with the side with the heaviest creases facing upwards.